I watched the movie Bambi then started to make a clay model, I asked miss if I could use a box to make a forest for the place that Bambi lived in.
First I had to get a box and get some blue paint to make the sky next I got some green paint and started painting the grass. After it dyed after one day I started to make my clay Bambi and some trees and after a few days this happen, and I finally finish it. I was so happy how it turned out.
Breanna
I was a pupil in Uru Mānuka and this blog is where I shared my learning
Wednesday, 5 September 2018
Tuesday, 28 August 2018
TEC 3D
The past few weeks i have been working on a 3D puzzle how i made it was
I had to draw out some lines on the wood then mark out were i had to drill and cut it out, after that i trimed it down with a tool
I had to draw out some lines on the wood then mark out were i had to drill and cut it out, after that i trimed it down with a tool
Thursday, 23 August 2018
Transport in plants
Aim: To observe xylem tissue and prove that they transport water up the plant.
Method:
1. Make a cut across the base of the celery stalk to expose a new section of the stem.
2. fill the petri dish with water and add a few drops of food coloring.
3. Place the celery stalk in the petri dish and gently clamp it in place using the retort stand, boss head and clamp.
4. leave the stalk undisturbed for 24 hours.
5. Remove the stalk from the clamp and petri dish. cut the stem about 1/3 of the way up the stem.
Method:
1. Make a cut across the base of the celery stalk to expose a new section of the stem.
2. fill the petri dish with water and add a few drops of food coloring.
3. Place the celery stalk in the petri dish and gently clamp it in place using the retort stand, boss head and clamp.
4. leave the stalk undisturbed for 24 hours.
5. Remove the stalk from the clamp and petri dish. cut the stem about 1/3 of the way up the stem.
Wednesday, 22 August 2018
What I am learning
We are making a jingles this term.
My job is to write the letter.
I am learning how to do a jingle.
My work shows my leaning bye me been on task.
I am wounding if jingles help people sell things.
My job is to write the letter.
I am learning how to do a jingle.
My work shows my leaning bye me been on task.
I am wounding if jingles help people sell things.
Friday, 10 August 2018
My adventurers 3D printing
I have made a 3d keyring that has my name on it.
How I made my keyring is I went on Thingiverse and tinkercad I modified my work, scaled it I online converted it so I could send it and print it
How I made my keyring is I went on Thingiverse and tinkercad I modified my work, scaled it I online converted it so I could send it and print it
Tuesday, 7 August 2018
Refraction Through Lenses
Aim: To investigate how different types of lenses refract light.
Method: 1. set up a ray box, triple-slit ray slide, and power supply.
2. place the convex lens in the space below. Place the ray box at the top of the page and shine the three rays of light at the lens. Make sure the central light ray hits the lens at 90 degrees as indicated in the diagram.
3. Carefully trace the direction of the incoming and refracted rays.
4. Repeat using the concave lens.
Method: 1. set up a ray box, triple-slit ray slide, and power supply.
2. place the convex lens in the space below. Place the ray box at the top of the page and shine the three rays of light at the lens. Make sure the central light ray hits the lens at 90 degrees as indicated in the diagram.
3. Carefully trace the direction of the incoming and refracted rays.
4. Repeat using the concave lens.
Monday, 6 August 2018
Bending light
Aim: To investigate how light is affected by changing the substance it is traveling through.
Method: Collect the equipment from your teacher, and set them up to produce a single beam of light.
Method: Collect the equipment from your teacher, and set them up to produce a single beam of light.
Subscribe to:
Posts (Atom)